Professional Electronic Fencing Tester, Verification; Swords, foils, sabers, loops, rollers, mask cables, device-roller cables, circuits complete with a weapon, jackets and conductive fabrics Cod.tester -a2 Art.899-02

Professional fencing tester for checking:
-swords, foils, sabers
- passers-by (also with English type bayonet plug)
-rollers, mask cables, device-roller cables
-complete circuits of a weapon (which include weapon, reel and cables)
-conductive jackets and fabrics (via special optional weight art.899-11)

Characteristics

• Simplified use for quick checks : automatic verification of the measured values ​​with those required by the FIE regulation or with those set by the user. The positive or negative outcome of the test is indicated by green or red LEDs and an acoustic signal.

• Professional use for weapons technicians : thanks to the multiple information shown on the graphic display, the quality of the equipment can be verified and the cause of the malfunction can be quickly identified.

• Simultaneous verification of all resistance values between the various conductors, as happens for a signaling device but with greater precision and resolution. Between 0 and 20Ω the resolution is 0.1Ω.

• Measure resistances quickly and accurately ; common multimeters are not suitable for measuring contact resistances as they use voltage and current values ​​that are too low.

• Reports very brief circuit interruptions that ordinary testers fail to detect. Signaling occurs with red LEDs and an acoustic signal.

• Selection of 4 display modes :

-- Numeric values (photo) : for a complete and professional check.
-- Analog bar (photo) : to see fast variations in resistance.
-- Time graph (photo) : to see the change in resistance over time.
-- Hit chart (photo) : stores and displays the behavior of the tip contact resistance during the hit.

• Tip supplied to check parts of the weapon (guard, blade, etc.).

• Easy fixing to the bench via the supplied clamp. It allows you to insert/disconnect the connectors without holding the equipment still with your hand.

• Internal USB port for future software updates.

• Internal rechargeable battery; duration approximately 10 hours, level display; auto-off after 15 minutes of inactivity.

• 100-240V power supply supplied. While the instrument is being powered, the battery is also being charged.

• Dimensions and weight: width. 21cm, height. 12cm, depth. 14cm. Weight 2.4kg.

CONTENT

- Testers

- 100-240V/14.4Vdc battery charger

- 6V 1.2Ah rechargeable battery

- Clamp for fixing to the table.

- 4mm banana plug for crocodile clip connection.