Waterproof White LED Light with Solar Panel and Integrated Ion Battery for Kayaks with SOS Function

Waterproof White LED Light with Solar Panel and Integrated Ion Battery for Kayaks with SOS Function

Waterproof white LED lighting with integrated lithium-ion battery, which charges on the boat from the sun (including remote control).

The light offers you protection and ensures your visibility even in the dark of night. The position of the vessel can be seen by using the ambient lamp in the water. This can be very important, especially with flat boats like kayaks.

In order to drive on water at night, lighting is mandatory in some waters! All parts of the lamp are made of anti-UV PMMA and can therefore withstand any weather conditions.

ATTENTION sailboat drivers: Please tape the light sensor to the lamp! The lamp is equipped with a light sensor, which automatically turns on the lamp when it is dark (function 1: lights up 4 times in quick succession). In order not to leave the vessel in function 1, it is necessary to mask the sensor so that the indicator lights up in function 1. Function 7 is correct, the lamp is on standby and does not turn on automatically at night. Unless the battery is empty, the lamp turns on automatically. Therefore, this lamp is not suitable for sailing boats. In port, the lamp can turn on by itself. To avoid this, mask the sensor and clean the solar panels regularly.

On the underside of the lamp there are 2 buttons: The "Power On/Off" button with a red border turns the lamp on and off and the "Function Switch" button with a silver border switches the various functions by pressing the button several times.

Function: The white LEDs light up 4 times in rapid succession. Used to show location.
Function: White LEDs flash in time - (similar to function 1, except the LEDs do not light up 4 times in rapid succession)
Function: SOS - white light emits an SOS sign
Function: All white LEDs light up constantly
Function: lamp off - OFF

There is a function that emits SOS light signals in an emergency (3rd function) if you are in danger and need help.

Functions can also be switched using the supplied remote control. If the lamp has been turned off using the button circled in red, it cannot be turned on again using the remote control. To turn it on with the remote control, the lamp must be set to the 5th function OFF with the remote control or with the silver framed button.

The lamp has 24 white and modern LEDs distributed at 360°.